background image
FABRICATION OPTIONS
C OLUMBIA ALUMINUM PRODUCTS, LLC
800-443-6677
FAX: 323-724-9146
www.columbiaaluminumproductsllc.com
75
0 = Mill Finish (MF)
1 = Clear Anodized (MA)
2 = Gold Anodized (G)
4 = Brite Dip Anodized Clear (BDC)
5 = White Painted (W)
6 = Brite Dip Gold Anodized (BDG)
7 = Satin Nickel (SN)
9 = Bronze Anodized (B)
Available finishes are listed below the part number.
FINISHES
*Products are not drawn to scale.
NAIL-ON MILLED END
For wood door frames using nails or screws to secure jambs to the aluminum sills.
Mill Sizes: A3 3/8" mill A4 1/2" mill A6 3/4" mill A9 1 1/8" mill

How to Order: Door opening plus twice mill size and state style size (e.g. 3059 37 1/2" net style
A6). All t-bolt pairs with 344 t-bolt astragal add 1/2" to door opening (if not already allowed).
Installation: Cut jambs to match slope of sill (6 or 9 degrees).
Standard Holes: One center screw hole per door opening on the slope. Three 1/8" nail holes each
end.
NAIL-ON RABBET JAMB
For wood door frames using nails or screws to secure door stops to aluminum sills.
How to Order: State exact net length and style (e.g. 3069-36" net style B). Pairs with 3441 t-bolt
astragal add 1/2" to door opening (if not already allowed).
Installation: Cut door stop to match slope of sill (6 or 9 degrees).
Standard Holes: One center screw hole per door opening on the slope. Two 1/8" nail holes each
end.
STYLE C POCKET CUT FOR METAL FRAME (PCMF)
Pocket cut thresholds/silk that will be dropped into installed frames.
How to Order: State exact net length, specify frame number or size, stop size, inswing or
outswing door, and Style C (e.g. 2799-36" net Timely 47C, inswing, Style C or fax complete
drawings).
Standard Holes: Three center screw holes per door.
STYLE A
STYLE C
STYLE B
SUMMARY
All special fabrications require signed faxed drawings. *
See price list for fabrication changes.
STYLE A Nail on milled end
STYLE B Nail on rabbet jambs
STYLE C Pocket cut for metal frame (PCMF)
STYLE D Center millout (Mullion Rout)
STYLE E Exterior notch
STYLE EE Horn
STYLE F Rip for flat installation
STYLE H Half notch door bottom
STYLE I Full notch door bottom
STYLE J 3 degree bevel door bottom
STYLE K Route for deadbolt on
t-bolt astragal
STYLE L Astragal Stop Cut
STYLE W Weep Hole